Weaver's Delight Restoration - It's Looking Like a Loom!

I went to the hardware store after work today to pick up some bolts and wingnuts to attach the top of the beater.  When I got home, I found out I bought the wrong size.  I found something in the basement that will work till I get the correct hardware.

I was able to attach the other "flapper thingy" on the fly shuttle temporarily, until I get an oblong washer that needs replacing and the correct bolt that my dad is going to make for it.

The apron was another fairly simple job to tack on, once I installed the cloth beam. 

After adjusting the brackets that hold the shafts, all four of them slid in easily.

Here is the loom from the rear, showing the sectional beam that I put on tonight.  It sure is heavy!  It still needs some cross braces made, to keep the wooden bars from giving when the warp is wound on.  I will have to get measurements for that tomorrow, so Bob can get them made.

I still haven't attached the picker sticks, since I am still waiting for the new pickers and leather straps.  Hopefully, they will arrive soon.

In the meantime, I still have more to work on.  The thread rack spindles are very rusty, so I took them all off tonight.  I think I will try the navel jelly on them tomorrow, instead of vinegar.

It was getting dark out and the mosquitoes were getting annoying, so I will get the rest of the red frame cleaned up and painted tomorrow.  My favorite color!

I've started looking at some rug books for inspiration.  I will have to be deciding what my first project will be very soon.

Weaver's Delight Restoration - More Taken Apart

The loom is slowly getting taken apart, mainly to clean rust off most of the cast iron brackets, and to get metal parts out of the way so I can sand and varnish the wood.

Two days ago, I finished painting all the black trim on the wood.  After that dried, I started getting the first coat of varnish on the wood framework.  I will lightly sand that first coat and then add another. 

The wooden bars with the pegs on the sectional beam needed to be cleaned and sanded.  I managed to finish that, and got a coat of varnish on them, also.  I will lightly sand them and get another coat of varnish on them, and then be able to assemble the sectional beam.

The frames to raise and lower the shafts were in pretty good shape, with minimal rust.  I finished removing them from the shafts last night, and used a wire brush on the drill to remove what little rust there was and then painted them tonight.  I finished painting the one side remaining in the photo tonight.

These parts to the shafts aren't going to be fun to clean.  The two that are done were cleaned with navel jelly and a lot of elbow grease.  I'm having to give my right hand and wrist a bit of rest from the sanding.  It was affecting my nerves last night and today.  I need to get my grip back to normal.  Electric sanders and drills speed up the cleaning process, but the vibration isn't too good for my body!  

I took the handle off the beater bar.  It is cast aluminum, and was ugly, so I primed it and painted it hunter green, like the other metal parts.  I think it looks much better.  I'll get a photo of it once I clean up the screws and reattach it.

The breast and back beam rollers are a very rough wood, and no amount of sanding is going to smooth them, so I just put a coat of varnish on them.  Hopefully, light sanding between several coats of varnish will help smooth them out a bit.  I think they rotate, so I don't think smooth is critical.  Obviously the loom came that way, and I'm sure many rugs were made on it through the years.  This is the front of the loom.  Even one coat of varnish has made a difference to the beam.

I still haven't touched the cloth beam, except to remove it from the loom to make it easier to paint the trim below it.  I still need to unwind the apron to see it's condition.  Hopefully it is just dirt that I will have to deal with, rather than replacing it.  Even if it needs replacing, it won't be too big of a deal.  I'm just hoping I don't need to run to the fabric store to purchase canvas and grommets.  It does look pretty dirty!

I like how the wood is starting to look.  This has the black trim finished, and one coat of varnish.  I am done with working on it this week.  We have a happy occasion to celebrate this weekend at the 65th anniversary picnic for Bob's mom and dad.  Next week, we have a sad occasion also, when we go to my sister's funeral.  We just found out about it tonight.  It was unexpected, and I'm sad.