Friday, July 5, 2013

Weaver's Delight "Pink Pony" Stuffing Machine and Rigby Cutter

I finally got motivated to get back to my blog today.  I was given a "pink pony" stuffing machine by our friend Lou down in Missouri when Bob and I were on vacation in April.  I haven't been feeling well since then, so have only been doing dibs and dabs with weaving lately.  I finally took enough photos to show how I prepare denim strips and load them in the tubes for weaving.

Preparing denim jeans for rugs is labor intensive.  They are plentiful at the resale shops and from friends, so I don't make any effort to open seams, remove pockets, or take out hems.  I trim around all those areas and then make one fairly straight edge on one side.
I purchased a strip cutter on eBay because my hand can't take the heavy cutting for any length of time with the rotary cutter any more.  This particular cutter is a Rigby Cutter.  It is pretty old, but it has been working pretty well for me.  I would have preferred a Fraser Cutter, since there are more options for parts.  They cost more than I was able to spend though.
The red cutter is adjusted away from the cutter blade for the strip width I want.  I use strips that are about 3/4" - 7/8" wide for a twill weave rug.  I would probably cut them 1/2" for plain weave rug.  Anything wider than that and it is almost impossible to get the strips tightly packed. 
Turn the crank and it cuts the strip.
When I get enough strips cut with various colors, I take a bundle of them and sit with them on my lap and cut a 45 degree angle at each end.  I usually do all one end, then flip them around and do the other end.  The angle must be in the same direction at both ends.

Here is a bundle that is probably enough to stuff 2-3 tubes for the shuttles.
I overlap them about 1/4" and triple-stitch zig-zag the ends together.
The strips feed through the shuttle better this way, and I have fewer hang-ups then if I use a 45 degree seam.
I sew them in a continuous strip until it is hard to sew any more.  They loop around in front of the machine and eventually there isn't any more space to sew.

I clip my threads when I'm done sewing and pull them out from under the presser foot.  They will curl into a spiral and that needs to be straightened out before running the strip through the stuffing machine.
The fabric strip is threaded through the eyelet guide in front of the left concave roller, then brought over the top of the roller and drops into the funnel below.  The convex roller is brought forward against the fabric strip. 
As seen in this photo, I straightened my strip into a container on the floor.  While turning the large wheel with the leather belt, the pole is used to poke the strip down into the tube and pack it tight.
Here is a tube loaded into a shuttle.
This rug is getting close to being complete.  Three more tubes will probably be enough. 

I am using a twill tape to keep track of the rug length and the temple that came with the loom to help keep a consistent width to the rug.






3 comments:

  1. thanks for the photos on the tube filler-have never seen that before

    ReplyDelete
  2. I found a "Pink Pony" in a garage sale and bought it because I didn't know what it was! I guessed that it was for use with textiles as it was pretty delicate. Finally visited a weaver's club and showed them a picture I had. To my delight they said yes we know what that is and we have 2 of them. The one I have looks very old. Can you tell me what the value of one of these is?

    ReplyDelete
  3. I heard the pink ponies were originally used to remove peas from their pods.

    ReplyDelete