Various Projects in Progress and Finished

UFOs.  Those unfinished objects that get set aside and never get finished.  I think it is a rare crafts person that never has any.  I came across one the other day, and decided it was too nice to not be finished.  This was a project that I think I saw in the Weaver's Craft magazine.  The yarns are fairly heavy, but a good weight for a bag.  The warp is a turquoise 3/2 pearl cotton, and the tabby weft is a heavier yarn, similar in weight to Sugar and Cream in a bluish green color. 
The weave structure is called Monk's Belt.  The weft used to weave the pattern is actually a thin, loosely woven plaid fabric, cut into bias strips about 3/8" wide.

I had the outer part of the bag done, and this photo shows how I formed the bottom of the bag.  The seams are on the sides.  With the bag inside out, I stitched across a triangle at each side.  When the bag is turned right side out, the triangle seams are at each end on the bottom. 

After a couple years on the shelf, I got it out and decided what still needed to be done to make it usable.

First of all, I needed handles, so I dug around in my yarns to find what I used for the tabby.  I threaded up a narrow warp on my floor loom and wove a strip long enough for two handles.  Then, I had to search my fabric stash to find the fabric I used, so I could cut the lining.  After sewing the lining on the regular sewing machine, I did all the finishing on my heavy industrial machine.  It was too thick to get under the presser foot on the regular machine.  I sure am glad I have that heavy old machine.
Click on the photos for more detail.

This rayon chenille scarf was completed in a few days, between other things I was working on.  The warp is a variegated reddish orange, and the weft is a dark red.  The weight is 1300-1400 yards per pound.  I used a 10 dent reed, and originally sleyed it at 20 epi, but that was too dense.  I resleyed at 17 epi (1-2-2) and that was just right. 

 The scarf is plain weave, but I did a short sample using 2-2 twill that also looks nice.

I am still working on my Autumn Leaves warp, and have four towels completed, and the fifth one is almost done.  I think I would like weaving it a bit better if it was on one of the larger looms.  I warped it the full width of my table loom, and ended up taking out one stripe on each edge. 

I am using eight colors in the warp, so I wound a warp long enough to make eight towels.  It was a bit too long for the loom, and I had trouble weaving the first couple.

The current towel is woven with light orange.

This rug is the first one on my second warp on the Weaver's Delight.  I set it up to weave log cabin using the plain weave cams.  My first attempt was weaving denim, but I couldn't get them tight enough with the plain weave, so I unwove it and tried the remainder of the polyester double-knit that I had cut.

That took some trial and error also, but I finally got something that I liked.  After I wove about a foot, I realized the error I saw earlier, but couldn't figure out what I did wrong, was very noticeable on the dark section.  I finally had to work the mechanism till all the warp threads were at one level, and then could see that I had sleyed two threads in a couple dents.  It's a good thing this rug is for me, or I would have unwoven everything again.  I can live with it.  Once this rug is done, I will cut it off and resley the reed to correct the errors.

I weighted my last four threads on each selvedge with 2 pound weights, because I think it helps me get an even edge, and the last rugs were nice and flat on the floor.  I do fiddle with the edges, because I don't like big fabric loops at each edge.  I get them snugged in tight to the selvedge by pulling on them. 

I have one more section of the dark to sew together and weave, and the last light section and the hem and this rug will be done.  Maybe I will complete it after work tomorrow.  Now it's time for bed.