Linen Towel Project

This week, I have been working on using more of my stash.  I purchased quite a lot of yarn at an estate sale a while back, and one of the things I bought was a large bundle of linen that was a cut off warp with no cross.  It was about four yards long, and a mix of a plyed smooth linen singles and tow linen singles. 

It's a good thing I am not a production weaver, because it took forever, or so it seemed, to get it on my Leclerc Artisat loom. 

Because the tow linen was so sticky, I decided to thread front to back so I could control the tangles better.  I worked with small bundles of pattern units and threaded the heddles first.  I wanted a cross, so as I threaded each bundle, I put the ends over and under my lease sticks attached to the back beam.

Once I threaded the heddles, added two floating selveges, and tied onto the backbeam, I was able to put some weights on the warp ends.  I moved the lease sticks to the front of the loom and worked it slowly toward the end of the warp.  The yarn was soooo sticky, and I was beginning to hope I wouldn't have to ditch the project.  Patience! 

It paid off!  But very slowly.  No warps broke while winding on the back beam. 

The warp is spaced 25 epi in a 15 dent reed.  It is sleyed 1-2-2.  The first dishtowel I am working on is mainly plain weave, with a border at each end.  The threading came from Marguerite Davison's book, Twill Miniature, on pg. 39.







 I'm using the first half of treadling #1 for the borders, with a little bit of plain weave between them.  With no tabby for this version, the weaving is going quickly.  So far, with tight tension, I have had minimal warp sticking together, but have had one broken warp thread so far. 

The weft is a turquoise blue 6/2 cotton, and seems to be working perfectly with the sett of the linen.  I love it when my guess turns our right the first time.  I wasn't planning on a towel with borders, but as I was spreading the warp and testing for correct threading, I kind of liked the look of it.  It is pretty typical of me changing the pattern in some way after I get started.

I use the Golden Ratio to determine the length of the towel and then use adding machine paper for a weaving guide to my towel length.   I can mark where the first borders are, and then mark where they should be on the other end of the towel.  Once the towel gets wound onto the front beam, I can't look back at what was woven.  I tend to get interrupted while weaving, and then forget what I did at the beginning, especially since I'm not a cookbook type of weaver.  My adding machine paper has saved me many a time, since I write a lot of notes on it, along with the inch marks.  It gets pinned to the edge of my towel while weaving with two pins.  It is kept loose, so I can see the whole length of the tape.  I use it again for the next towel if I am weaving something similar.
I'm hoping to get 3-4 towels out of this warp.