Wednesday, September 14, 2011

New Toy (Tool)

The steam press I ordered arrived today, so I put it through it's paces to test it out.  I have been wanting one for quite a while, and when I started working on Teddy bear fabric, I decided to start looking for one.  I ended up buying one called Steam Fast.  It isn't a super good one, so I'm hoping it gets me a few years of use out of it.  It's not like I will be using it daily, so it should. 

In order to stabilize the fabrics, I needed to fuse a lightweight interfacing to all of them, and I didn't think my shoulders would hold up to all the pressure needed with a conventional iron.

So far, after fusing the five finished fabrics, it has worked great.  It has several heat settings, so I set it on the one for wool, filled the steam reservoir with water, and got them all done, and my shoulders are not sore at all!  The interfacing feels good and tight.  I used a lot of steam, plus a damp press cloth, so they are all hanging to dry completely.




The turquoise twill is Teddy fabric number 7.  The warp is fairly thin wool, sett at 22 ends per inch.  It is woven in Finnish Twill, from pg. 37 of Davison's pattern book.  Both of these fabrics are version I treadling.  The turquoise is angora and wool that I dyed (color requested by a granddaughter).  The brown twill is mohair in a varigated color.  It is kind of difficult to wind a bobbin and weave with it because it is pretty hairy.  I tried a plain weave first, but I think my warp was too tight, so I'm using the twill.  The pattern won't show very much once the fabric is wet-finished, but I think it will allow the yarn to be a bit more fuzzy.  Fuzzy Wuzzy was a bear, you know, and this fabric will be soon!

This photo is fabric number 6 and 7.  The peach colored angora wool stripe (also dyed per granddaughter request) is version IV of the Finnish Twill.  It is one of my favorites of the bear fabric so far.  I think I may try it for some towels sometime.  I think it could look great with different colored stripes.

3 comments:

  1. Congrats on the steam press! Your intricate work is amazing and I look forward to seeing more of the bear fabric being made into bears.
    Great post.....

    ReplyDelete
  2. Thanks Mike. I'm really hoping the fabric isn't too thick. The press did a great job with the interfacing. I only found a few spots that need a touch-up. I'll have to get out my bear patterns soon.

    ReplyDelete