Thursday, April 22, 2010

Huck Lattice Towels

The rug warp and the Atwater-Bronson lace warp are at a standstill, with half wound for each of them.  I got a little sidetracked with a linen  warp that I had.  This warp is only about 3 1/2 to 4 yards long, and like the 20 yard warp, it had no cross.  It was a mix of a two ply approximately 20/2 size warp and a tow linen singles.  I laid it out on my carpet with a weight on one end, and pulled out the plyed yarn 10 strands at a time.  Because there was no cross, I threaded the loom front to back.  Once I got it threaded through the heddles and tied onto the back, I draped it over the counterbalance bar on the loom behind  this one and added weight to it.  Once it had the weight added, I was able to treadle two plain weave sheds and add lease sticks.

















My chosen pattern came from the Handwoven magazine, March/April of 2002, page 44.  (Check Interweave Press for back-issues.)  The article was for weaving 5 towels, all different weaves.  I started with treadling #5, a huck lattice.


 This design calls for ladder hemstitching and the magazine had the instructions on page 14.  The hemstitching is started from the right (right-handed) and groups 5 warp threads at a time.










This is a close-up of the second half of the hemstitching.  It wraps around the same same threads.  The loop of heavy yarn seen in the photo keeps a gap between the two rows and will be pulled out later.








I got a start on the weaving, completing about 6" of the first towel.  I like the lattice look, and once the towel is wet finished, it will be more prominent.

Now to bed.

6 comments:

  1. It really looks nice, I'll look it up in that handwoven issue. I am starting new towels so maybe I'll change may mind about the pattern :-)

    ReplyDelete
  2. I think it's amazing how powerful hem stitch is.

    ReplyDelete
  3. Marion, after completing one towel with the huch latice, I don't recommend it unless you are using a fine warp yarn. There are long floats on the reverse side (seven threads).

    Sharon, I liked the ladder hem stitch. It's the first time I've used it. I've done a lattice hemstitch before, but it wouldn't work with the uneven number of threads used with this towel.

    ReplyDelete
  4. I stay with my first idea then, because I am using cottoline. :-)

    ReplyDelete
  5. I am deeply in love with every single piece of information you post here.

    Huck Towel

    ReplyDelete
  6. Hi, I have just visited your site and the info you have covered has been of great interest to me.

    ReplyDelete